KS Racing Air Suspension Kits come with the best dampening settings to match up the properties of pneumatic springs in order to not only increase the vehicle’s stability but to also allow the vehicle to be more stable when cornering. The kit is a direct bolt on kit, so there is no need for modification, welding or cutting the car body.
Our product does not only allows for changes in air pressure, but also having the ability to adjust the maximum and minimum ride height freely to match up the body kit of the car to achieve the desired ride height.
Within the KS Racing Air Suspension Kit, it includes a full set of the high performance, 33 levels of dampening and ride height adjustable shocks. Most of the kits include the upper mount in the fronts and rears. The strut come with pillow ball top mounts, hence having the ability to adjust different degrees of camber settings.
Different types of mounts can be chosen freely, such as pillow ball top mounts, aluminum top mounts, rubber top mounts and rubber with pillow top mounts. In our basic kit, it comes with a high-pressure, mute and rotational speed compressor from the brand called VIAIR. They produce the world’s fastest airbag pump.
It takes only 3.5 minutes for 1 compressor to pump a 10L tank, 0-200psi. If you are looking to pump air even faster, we can supply an extra compressor. Each compressor comes with 4 snubbers and high- tech silencers to increase noise suppression.
The tire pressure gauge can be connected to the air tank to fill your tires; the air pressure in the tank is sufficient for the tire pressure gauge.
The air pressure in the air tank is sufficient for the pneumatic tool, which can be connected to the air tank as well to clean the exterior of your vehicle.
The ride height can be adjusted with ease while in the car. The ride height can be adjusted all the time to meet your desired height depending on a load of your vehicle.
The vehicle’s ride height is shown on the pressure gauge supplied with this kit.
No need to install pressure gauge and switch and can protect the car interior design.
The adjustment range of ride height is between 0- 120/200mm. (based on different applications).
Available for 3 ride height memories.
It only takes 2-5 seconds only to lowering and raising the vehicle ride height.
The Remote Kit comes with 4 pcs complex big valve and 1 X remote control.
The Deluxe Kit comes with 8 pcs complex big valve and 2 X remote control.
Remote control allows you to adjust the ride height while in or out of the car.
The remote control shows a warning signal for deficient tank pressure.
The remote control shows a memory for engine start and automatically orient the ride height.
Fast installation within 2 hours. The wire setting is easy for installation and is just needs to connect the affirmative and negative electricity. Don’t need complex wire setting.
No messy wires and parts will be seen as all parts are collected in the monitor box.
Battery change is unnecessary (charged by USB).
Power saving device (sleeping mode).
Function setting for speeding and exhausting.
Smart design – lightweight volume, tank, remote control monitor and integral motor.
|Speed Control||Premium Small Valve 8 in 1|
|Packages||Basic||Remote||Professional||Deluxe||Pressure Memory||High Level Sensor|
|Shocks||KS 32 level dampening||KS 32 level dampening||KS 32 level dampening||KS 32 level dampening||KS 32 level dampening||KS 32 level dampening|
|Air Compressor – Viair (12Volt)||set||1||1||1||1||1||1|
|Alumminium Tank (Optional: Iron Tank)||pc||2.5 gallon (9.5L)||2.5 gallon (9.5L)||5 gallon (18.9L)||5 gallon (18.9L)||5 gallon (18.9L)||5 gallon (18.9L)|
|1/4″ Quick Coupling||pc||4||4||4||4||4||4|
|1/4″ Elbow Quick Coupling||pc||1||1||1||1||1||1|
|10mm pipe three Trumpf screw||pc||2||2||2||4||4||4|
|Auto air control box||pc||1 (2 groups with 4 pcs complex big valve)||1 (2 groups with 4 pcs complex big valve)||1 (4 groups with 8 pcs complex big valve)||1 (4 groups with 8 pcs complex big valve)||Control ECU with panel 5pcs pressure switch, Remote ECU and wireless switch cables with fuse, connector relay 1pc||Control ECU with panel 4pcs high level sensors, Remote ECU and wireless switch cables with fuse, connector relay 1pc|
|1/8″ Copper connector||pc||6||6||6||6||6||6|
|1/8″ Quick Coupling or Quick connector||pc||2||2||2||2||2||2|
|100mm pipe quick Coupling Elbow||pc||4||4||4||4||4||4|
|Dual Needle Gauge||pc||1||–||2||–||–||–|
|Switch and Panel||set||1||–||1||–||–||–|
|Wireless Pressure Display||pc||–||1||–||1||–||–|
|Wireless Control unit||set||–||1||–||1||–||–|
|Air flow Switch 1||pc||2||2||–||–||–||–|
|Air flow Switch 2||–||–||4||4||–||–|
|Acrylic display for the unit||pc||1||1||1||1||–||–|